1/2 in. Female NPT x Female NPT Full Port Gate Valve, Crown Handle
1/2 in. Female NPT x Female NPT Full Port Gate Valve, Crown Handle
Sizes in This Series
Full-Port Brass Gate Valve, Female NPT x Female NPT. Jump to another size or add it straight to your cart:
| Size | Part # | Price | Cart |
| 1/4 in. | 940130 | $22.99 | Add to cart |
| 1/2 in. (this page) | 940132C | $16.99 | — |
| 1 in. | 940134X | $22.99 | Add to cart |
| 1-1/4 in. | 940135 | $60.99 | Add to cart |
Overview
The Midland Industries 940132C is a 1/2 in. full-port brass gate valve with Female NPT x Female NPT ends and a crown handle. Its non-rising stem, screw-in bonnet, and solid wedge disc give a straight-through, full-bore flow path with tight metal-to-metal shutoff, making it a solid choice for on/off isolation duty on water, oil, and gas lines (including diesel fuel) rated to 200 PSI WOG.
Technical Specifications
| Manufacturer | Midland Industries |
| Part Number (MPN) | 940132C |
| Nominal Size | 1/2 in. |
| End Connections | Female NPT x Female NPT (FPT x FPT) |
| Thread Standard | 1/2-14 NPT, ANSI B1.20.1 |
| Port Type | Full port |
| Pressure Rating | 200 PSI WOG (cold water, oil, gas) |
| Temperature Range | 32 to 320 °F |
| Stem | Non-rising stem, solid wedge disc |
| Bonnet | Screw-in bonnet |
| Handle | Crown handle |
| Face-to-Face Length | 1.71 in. |
| Weight | 0.75 lb |
| Lead Content | Contains lead - not for potable water |
Materials of Construction
| Body, Cap and Disc | Brass (C85700) |
| Seat | PTFE |
| Rubber Seat | NBR |
| Stem and Packing Nut | Brass (C85700) |
| Handle | Cast iron |
| Nameplate | Aluminum |
Typical Applications
Main-line and branch isolation where a valve stays fully open or fully closed for long periods - water service, fuel and oil lines, irrigation, and equipment shutoff. Gate valves are built for isolation, not throttling; for frequent flow control, use a ball valve instead (see the comparison guide below). Not for potable drinking water.
Cross-Reference and Interchange
This valve cross-references to these competitor and industry part numbers: 01719101G, 514T03P. Replacing one of these? Match nominal size, end connections, and the rating for a direct fit, or send us your part number and we will confirm the interchange.
Sizing and Installation Resources
- How to Choose the Right Valve
- Gate Valve vs Ball Valve: Which to Use When
- Valve Pressure and Temperature Ratings
- NPT Tightening: Turns Past Hand-Tight
- Pipe Thread Sealants: Teflon Tape vs Pipe Dope
- Lead-Free Valves and NSF/ANSI 61 Compliance
Frequently Asked Questions
What is a gate valve best used for?
Full on/off isolation. The full-port wedge gives unrestricted flow when open, but gate valves are not meant for throttling or frequent cycling.
Gate valve or ball valve?
Use a gate valve for set-and-forget isolation; use a ball valve for frequent operation and faster quarter-turn shutoff. See our comparison guide above.
What is the pressure rating?
200 PSI WOG (cold water, oil, gas), with a 32 to 320 °F service range.
Can I use it on drinking water?
No. This valve contains lead and is not certified for potable water. Choose a lead-free valve certified to NSF/ANSI 61.
California Proposition 65 Warning: This product can expose you to lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.