8mm x 1/4 in. Plastic Composite Swivel Male Elbow
Sizes in This Series
Composite push-to-connect swivel male elbows. Jump to another size or add it straight to your cart:
| Size | Part # | Price | Cart |
| 3/16 in. x 1/8 in. | 20517C32 | $2.54 | Add to cart |
| 5/16 in. x 1/8 in. | 269PPSC-5A | $4.59 | Add to cart |
| 8mm x 1/4 in. (this page) | 269PPSC-8MMX1/4 | $2.88 | — |
Overview
The Champion Brass 269PPSC-8MMX1/4 is a composite 90-degree swivel male elbow joining 8mm push-to-connect tubing to a 1/4 in. male NPT thread. Its positional swivel lets you orient the tube run after the threads are tightened. Corrosion-proof composite construction keeps it light and well matched to pneumatic and low-pressure fluid lines.
Technical Specifications
| Manufacturer Part # | 269PPSC-8MMX1/4 |
| Fitting Type | 90° Swivel Male Elbow |
| Connection 1 | 8mm Push-to-Connect |
| Connection 2 | 1/4 in. Male NPT (swivel) |
| Thread Size | 1/4 - 18 |
| Material | Composite |
| Pressure Rating | 150 psi |
| Temperature Rating | 32°F to 140°F |
Materials of Construction
| Body | Composite (glass-reinforced polymer) |
| Connection | Push-to-Connect collet with male NPT thread |
Typical Applications
This metric-tube composite elbow fits pneumatic controls, instrument air, and low-pressure fluid transfer on equipment built to 8mm tubing. The push-to-connect end makes tool-free, repeatable connections while the 1/4 in. male NPT leg threads into manifolds, valves, and equipment ports.
Cross-Reference and Interchange
Need to match this to another brand? Send us your part number and we will confirm the interchange, or match nominal size, connection types, and material before you order.
Sizing and Installation Resources
- Push-to-Connect Fittings Selection Guide
- NPT Thread Tightening: Turns Past Hand Tight
- Pipe Size Reference Chart
- Teflon Tape vs. Pipe Dope
FAQ
Can I reposition the elbow after tightening?
Yes. The positional swivel lets you rotate the body to aim the tube leg after the male NPT thread is tight.
What tubing does the push-to-connect side accept?
It accepts 8mm OD tubing. Cut the tube square, deburr, and push fully home until it seats.
What is the pressure and temperature limit?
It is rated to 150 psi between 32°F and 140°F. Stay within both for dependable service.
Do the threads need sealant?
Apply PTFE tape or compatible pipe sealant to the 1/4 in. male NPT thread; see our Teflon tape vs. pipe dope guide.
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.