5/16 in. x 1/8 in. Plastic Composite Swivel Male Elbow
Sizes in This Series
Composite push-to-connect swivel male elbows. Jump to another size or add it straight to your cart:
| Size | Part # | Price | Cart |
| 3/16 in. x 1/8 in. | 20517C32 | $2.54 | Add to cart |
| 5/16 in. x 1/8 in. (this page) | 269PPSC-5A | $4.59 | — |
| 8mm x 1/4 in. | 269PPSC-8MMX1/4 | $2.88 | Add to cart |
Overview
The Champion Brass 269PPSC-5A is a composite 90-degree swivel male elbow connecting 5/16 in. push-to-connect tubing to a 1/8 in. male NPT thread. The positional swivel lets you set the tube angle after the threads are made up. Lightweight composite construction resists corrosion and keeps this elbow well suited to air and low-pressure fluid lines.
Technical Specifications
| Manufacturer Part # | 269PPSC-5A |
| Fitting Type | 90° Swivel Male Elbow |
| Connection 1 | 5/16 in. Push-to-Connect |
| Connection 2 | 1/8 in. Male NPT (swivel) |
| Thread Size | 1/8 - 27 |
| Material | Composite |
| Pressure Rating | 150 psi |
| Temperature Rating | 32°F to 140°F |
Materials of Construction
| Body | Composite (glass-reinforced polymer) |
| Connection | Push-to-Connect collet with male NPT thread |
Typical Applications
This composite swivel elbow is a fit for pneumatic controls, low-pressure fluid transfer, and OEM equipment where weight and corrosion resistance matter. The push-to-connect end gives tool-free, repeatable connections on 5/16 in. tubing while the 1/8 in. male NPT leg threads into compact ports and manifolds.
Cross-Reference and Interchange
Need to match this to another brand? Send us your part number and we will confirm the interchange, or match nominal size, connection types, and material before you order.
Sizing and Installation Resources
- Push-to-Connect Fittings Selection Guide
- NPT Thread Tightening: Turns Past Hand Tight
- Pipe Size Reference Chart
- Teflon Tape vs. Pipe Dope
FAQ
Can I reposition the elbow after tightening?
Yes. The positional swivel lets you rotate the body to aim the tube leg once the male NPT thread is tight.
What is the maximum working pressure?
It is rated to 150 psi within the 32°F to 140°F range. Stay within both limits for reliable service.
What tubing does the push-to-connect side accept?
It accepts 5/16 in. OD tubing. Cut square, deburr, and push fully home until seated.
Do I need sealant on the threads?
Apply PTFE tape or compatible pipe sealant to the 1/8 in. male NPT thread; see our Teflon tape vs. pipe dope guide.
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.