3/8 in. x 1/4 in. Composite Male Swivel Branch Tee
Overview
The Midland 20107A is a brass swivel male branch tee with two 3/8 in. push-to-connect run ports and a 1/4 in. male NPTF swivel branch. The swivel branch lets you orient the threaded take-off after the fitting is seated. Solid brass construction gives reliable corrosion resistance for compressed air, water, and light fluid systems that need a side branch off a 3/8 in. tube run.
Technical Specifications
| Manufacturer Part # | 20107A |
| Fitting Type | Swivel Male Branch Tee |
| Run Connections | 3/8 in. Push-to-Connect (x2) |
| Branch Connection | 1/4 in. Male NPTF Swivel |
| Thread Size | 1/4 - 18 |
| Hex Size | 0.56 in. |
| Temperature Rating | -10°F to 200°F |
Materials of Construction
| Body | Brass |
| Connection | Push-to-Connect collets with O-ring seals |
Typical Applications
Use this tee to add a 1/4 in. threaded branch, such as a gauge, drain, or pilot line, to a continuous 3/8 in. push-to-connect run on pneumatic and low-pressure fluid systems. The brass body and swivel branch make it a durable, flexible choice for machine builds and maintenance work.
Cross-Reference and Interchange
This swivel branch tee cross-references to these competitor and industry part numbers: 272PPS-6B-Y. Replacing one of these? Match nominal size, connections, and rating, or send us your part number and we will confirm the interchange.
Sizing and Installation Resources
- Push-to-Connect Fittings Selection Guide
- NPT Thread Tightening: Turns Past Hand-Tight
- Pipe Size Reference Chart
- Teflon Tape vs. Pipe Dope
Frequently Asked Questions
Does the branch swivel after installation?
Yes. The 1/4 in. male NPTF branch swivels so you can orient the take-off independently of thread torque.
What tubing fits the run ports?
Both run ports accept 3/8 in. outside-diameter tubing rated for push-to-connect service.
Should I use thread sealant on the branch?
A light wrap of PTFE tape or a thread sealant is recommended on the NPTF branch for air and fluid service.
What is the temperature limit?
This fitting is rated from -10°F to 200°F.
WARNING: This product can expose you to chemicals including lead, known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.