1/4 in. x 3/8 in. Push-In x Male NPT Swivel Elbow
1/4 in. x 3/8 in. Push-In x Male NPT Swivel Elbow
Overview
The Midland 20086 is a brass 90° swivel elbow that connects a 1/4 in. push-to-connect tube port to a 3/8 in. male NPTF swivel thread. Measuring 1.43 in. long with an 11/16 in. hex, it pairs a stepped-up thread with a smaller tube line and a swivel that lets you orient the tubing after threading. Brass construction suits compressed air, water, and light oil service.
Technical Specifications
| Manufacturer Part # | 20086 |
| Fitting Type | 90° Swivel Elbow |
| Tube Connection | 1/4 in. Push-to-Connect |
| Thread Connection | 3/8 in. Male NPTF Swivel |
| Thread Size | 3/8 - 18 |
| Hex Size | 11/16 in. |
| Length | 1.43 in. |
| Temperature Rating | -10°F to 200°F |
Materials of Construction
| Body | Brass |
| Connection | Push-to-Connect collet with O-ring seal |
Typical Applications
A common choice for compressed air drops, pneumatic tooling, and low-pressure fluid lines where a 1/4 in. tube run meets a 3/8 in. threaded port. The swivel thread simplifies alignment on manifolds, cylinders, and instrumentation where the port position is fixed.
Cross-Reference and Interchange
This swivel elbow cross-references to these competitor and industry part numbers: 02169-0406, 11184-00210, 169PL-4-6, 269-OFS-04x06, 269PPS-4C, 269PPS-4C-Y, 51025K138, 769-1-46, 969-4-6PXDOTS, AQ69-PS-4X6, D7069S4C, D7069S-4C, DQ69PS-4X6, MQ69S-46, PC69SW4C, PC69SW-4C, PTC69S-4C, S269PMT-4-6, W169PL-4-6. Replacing one of these? Match nominal size, connections, and rating, or send us your part number and we will confirm the interchange.
Sizing and Installation Resources
- Push-to-Connect Fittings Selection Guide
- NPT Thread Tightening: Turns Past Hand-Tight
- Pipe Size Reference Chart
- Teflon Tape vs. Pipe Dope
Frequently Asked Questions
Does the thread swivel after installation?
Yes. The 3/8 in. male NPTF connection swivels so you can orient the 1/4 in. tube port independently of thread torque.
What tubing fits the 1/4 in. port?
It accepts 1/4 in. outside-diameter tubing rated for push-to-connect service.
Is a nickel-plated version available?
Yes, the nickel-plated equivalent is offered as 20086N for enhanced surface protection.
What is the temperature limit?
This fitting is rated from -10°F to 200°F.
WARNING: This product can expose you to chemicals including lead, known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.