1/4 in. x 1/8 in. Push-In x Male NPT Nickel-Plated Adapter
Sizes in This Series
Nickel-plated brass push-in x Male NPT adapters. Jump to another size or add it straight to your cart:
| Size | Part # | Price | Cart |
| 5/32 in. x 10-32 | 20049N | $6.99 | Add to cart |
| 1/4 in. x 1/8 in. (this page) | 20054NA | $4.30 | — |
| 3/8 in. x 3/8 in. | 20059N | $9.99 | Add to cart |
Overview
The Midland 20054NA is a nickel-plated brass adapter joining 1/4 in. push-in tubing to a 1/8 in. Male NPT port. The push-to-connect collet seals tubing instantly, and the nickel plating adds corrosion resistance and a clean finish over the forged brass body.
Technical Specifications
| MPN | 20054NA |
| Tube Size (Push-In) | 1/4 in. |
| Thread Size | 1/8 in. Male NPT |
| Connection Type | Push-to-Connect x Male NPT |
| Pressure Rating | 290 psi |
| Temperature Rating | -4°F to 176°F |
Materials of Construction
| Body | Nickel-Plated Brass |
| Collet / Grip Ring | Acetal with stainless gripping teeth |
| O-Ring Seal | Nitrile (NBR) |
Typical Applications
Used on compressed-air drops, pneumatic controls, and instrumentation where the nickel finish resists tarnish in damp or washdown areas. The 1/8 in. Male NPT thread lands in valves, gauges, and compact manifolds.
Cross-Reference and Interchange
Need to match an existing fitting? Send us your part number and we will confirm the interchange, or match nominal size, connections, and rating from the specifications above.
Sizing and Installation Resources
- Push-to-Connect Fittings Selection Guide
- NPT Thread Tightening: Turns Past Hand-Tight
- Pipe Size Reference Chart
- Teflon Tape vs. Pipe Dope
Frequently Asked Questions
What tubing fits the push-in end?
1/4 in. (6 mm nominal) OD tubing pushes straight into the collet until seated.
Does the nickel plating change the seal?
No. Plating is cosmetic and corrosion-protective; the collet and O-ring seal the same as standard brass.
How do I seal the NPT thread?
Apply PTFE tape or pipe dope and tighten one to two turns past hand-tight.
What is the working pressure?
290 psi within the -4°F to 176°F temperature range.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.