1/4 in. x 1/4 in. Push-In x Male NPT Swivel Branch Tee, Nickel-Plated
1/4 in. x 1/4 in. Push-In x Male NPT Swivel Branch Tee, Nickel-Plated
Overview
The Midland 20106N is a nickel-plated brass swivel male branch tee with two 1/4 in. push-to-connect run ports and a 1/4 in. male global-thread swivel branch. Rated to 290 psi, it offers higher working pressure than composite tees plus the corrosion protection and clean finish of nickel plating. The swivel branch orients into place after threading.
Technical Specifications
| Manufacturer Part # | 20106N |
| Fitting Type | Swivel Male Branch Tee |
| Run Connections | 1/4 in. Push-to-Connect (x2) |
| Branch Connection | 1/4 in. Male Global Thread Swivel |
| Hex Size | 0.59 in. |
| Finish | Nickel-Plated |
| Pressure Rating | 290 psi |
| Temperature Rating | -4°F to 176°F |
Materials of Construction
| Body | Nickel-Plated Brass |
| Connection | Push-to-Connect collets with O-ring seals |
Typical Applications
A strong choice for higher-pressure pneumatic and fluid systems up to 290 psi where you need to branch a 1/4 in. threaded port off a 1/4 in. tube run. The nickel-plated finish suits cleaner, more demanding environments such as automation, instrumentation, and equipment exposed to moisture.
Cross-Reference and Interchange
This swivel branch tee cross-references to these competitor and industry part numbers: 272PPSNI-4B, 51495K147, 872100404, 87210-04-04, W172PLP-4-4. Replacing one of these? Match nominal size, connections, and rating, or send us your part number and we will confirm the interchange.
Sizing and Installation Resources
- Push-to-Connect Fittings Selection Guide
- NPT Thread Tightening: Turns Past Hand-Tight
- Pipe Size Reference Chart
- Teflon Tape vs. Pipe Dope
Frequently Asked Questions
What is a global-thread swivel?
It is a swiveling male thread designed to seal across common global thread standards; confirm your mating port to ensure a proper match.
What is the maximum pressure?
This nickel-plated brass tee is rated to 290 psi, higher than comparable composite tees.
Why choose nickel-plated over plain brass?
Nickel plating adds corrosion resistance and a clean finish for moisture-prone or appearance-sensitive applications.
What is the temperature range?
It is rated for -4°F to 176°F.
WARNING: This product can expose you to chemicals including lead, known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.