1/4 in. x 10-32 Nickel-Plated Composite Male Swivel Elbow
Sizes in This Series
Nickel-plated brass push-in x male swivel elbows. Jump to another size or add it straight to your cart:
| Size | Part # | Price | Cart |
| 5/32 in. x 10-32 | 20076N | $10.99 | Add to cart |
| 1/4 in. x 10-32 (this page) | 20078N | $7.99 | — |
| 5/16 in. x 3/8 in. | 20539NA | $14.99 | Add to cart |
Overview
The Midland 20078N is a nickel-plated brass swivel elbow connecting 1/4 in. push-in tubing to a 10-32 male thread. The threaded leg rotates after installation to aim the tube port, and the push-to-connect collet seals the tube on insertion without tools.
Technical Specifications
| MPN | 20078N |
| Tube Size (Push-In) | 1/4 in. |
| Thread Size | 10-32 Male |
| Connection Type | Push-to-Connect x Male Swivel, 90° |
| Pressure Rating | 290 psi |
| Temperature Rating | -4°F to 176°F |
Materials of Construction
| Body | Nickel-Plated Brass |
| Collet / Grip Ring | Acetal with stainless gripping teeth |
| O-Ring Seal | Nitrile (NBR) |
Typical Applications
Used on miniature pneumatic valves, sensors, and air-logic manifolds with 10-32 ports, where the larger 1/4 in. tube feeds higher flow and the swivel leg lets the installer orient the run after tightening. The nickel finish resists tarnish.
Cross-Reference and Interchange
This nickel-plated swivel elbow cross-references to these competitor and industry part numbers: 269PPSNI-4X1032. Replacing one of these? Match nominal size, connections, and rating, or send us your part number and we will confirm the interchange.
Sizing and Installation Resources
- Push-to-Connect Fittings Selection Guide
- NPT Thread Tightening: Turns Past Hand-Tight
- Pipe Size Reference Chart
- Teflon Tape vs. Pipe Dope
Frequently Asked Questions
What does the swivel do?
The threaded leg rotates after tightening, letting you aim the tube port without disturbing the thread seal.
What tubing fits the push-in end?
1/4 in. (6 mm nominal) OD tubing inserts directly into the collet.
Is 10-32 a pipe thread?
No. 10-32 is a straight machine thread sealed by the fitting O-ring, not a tapered NPT pipe thread.
What is the working pressure?
290 psi within the -4°F to 176°F temperature range.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.