1/4 in. x 1/4 in. Push-In x Male NPT Elbow
1/4 in. x 1/4 in. Push-In x Male NPT Elbow
Sizes in This Series
Forged brass 90-degree push-in x Male NPT elbows. Jump to another size or add it straight to your cart:
| Size | Part # | Price | Cart |
| 1/4 in. x 1/4 in. (this page) | 20069 | $4.84 | — |
| 3/8 in. x 1/4 in. | 20072 | $6.99 | Add to cart |
| 1/2 in. x 1/4 in. | 20074 | $10.99 | Add to cart |
Overview
The Midland 20069 is a forged brass 90-degree elbow joining 1/4 in. push-in tubing to a 1/4 in. Male NPT port. The push-to-connect collet grips the tube on insertion, and the right-angle body routes air or fluid around corners without strain on the tubing.
Technical Specifications
| MPN | 20069 |
| Tube Size (Push-In) | 1/4 in. |
| Thread Size | 1/4 in. - 18 Male NPT |
| Connection Type | Push-to-Connect x Male NPT, 90° |
| Temperature Rating | -10°F to 200°F |
Materials of Construction
| Body | Forged Brass |
| Collet / Grip Ring | Acetal with stainless gripping teeth |
| O-Ring Seal | Nitrile (NBR) |
Typical Applications
Used where tubing must turn 90 degrees at a manifold, cylinder, or valve, such as pneumatic machine builds, air-logic panels, and compact equipment. The forged brass body handles vibration and repeated connection cycles.
Cross-Reference and Interchange
This push-in elbow cross-references to these competitor and industry part numbers: 02069-0404, 11261-217, 169PLNS-44, 269-OF-04x04, 269PP-4-4, 269PP-4B, 69PC-4-4, 769-44, PC69-4B, PTC69-4B, QPL69-4-4. Replacing one of these? Match nominal size, connections, and rating, or send us your part number and we will confirm the interchange.
Sizing and Installation Resources
- Push-to-Connect Fittings Selection Guide
- NPT Thread Tightening: Turns Past Hand-Tight
- Pipe Size Reference Chart
- Teflon Tape vs. Pipe Dope
Frequently Asked Questions
What tubing fits the push-in end?
1/4 in. (6 mm nominal) OD tubing inserts directly into the collet.
Does the elbow swivel?
No. This is a fixed 90-degree elbow. For a rotating leg, choose a swivel elbow.
How do I seal the NPT thread?
Apply PTFE tape or pipe dope and tighten one to two turns past hand-tight.
What is the temperature range?
Rated for -10°F to 200°F service.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.