1/4 in. Light Pattern Short Rod Nut
1/4 in. Light Pattern Short Rod Nut
Sizes in This Series
SAE 45° flare short rod nuts. Jump to another size or add it straight to your cart:
| Size | Part # | Price | Cart |
| 1/8 in. | 10013 | $1.70 | Add to cart |
| 1/4 in. (this page) | 10015L | $1.07 | — |
| 5/8 in. | 10020L | $3.40 | Add to cart |
Overview
The Midland 10015L is a 1/4 in. light pattern brass hex short rod nut for SAE 45-degree flare connections. The light pattern uses a thinner, lighter body than standard nuts to save weight and cost on lower-pressure runs. Its 1/2 in. hex and short 3/4 in. body tighten easily in confined spaces, drawing a flared 1/4 in. tube against its seat for a metal-to-metal seal rated to 1400 psi.
Technical Specifications
| Manufacturer Part # | 10015L |
| Fitting Type | Light Pattern Hex Short Rod Nut |
| Connection | 1/4 in. SAE 45° Flare |
| Hex Size | 1/2 in. |
| Length | 3/4 in. |
| Pressure Rating | 1400 psi |
| Temperature Range | -65°F to 250°F |
Materials of Construction
| Body | Brass |
| For Use With | Copper, Brass, Aluminum, Steel Hydraulic Tubing |
Typical Applications
Secures 1/4 in. SAE 45-degree flared tubing to flare fitting bodies in appliance gas connectors, refrigeration, fuel, instrumentation, and general low- to medium-pressure tubing assemblies. The light pattern is chosen where the full pressure rating of a standard nut is not needed and lower weight or cost is preferred.
Cross-Reference and Interchange
This short rod nut cross-references to these competitor and industry part numbers: 04014-04, 1110x4, 141040, 21110x4, 41C, 41-FS-04, 41FS-4, 41S4, 41S-4, 41-S-4, 41S-4A, D41S4, D41S-4, F40002, FF41S-4, N1-4, NSE1-4, P-41-S-4, S41S-4. Replacing one of these? Match nominal size, connections, and rating, or send us your part number and we will confirm the interchange.
Sizing and Installation Resources
- Flare Fittings: SAE 45° vs. Inverted
- Compression and Flare Fitting Sizing Chart
- NPT, BSPP and JIC Thread Identification Guide
- Teflon Tape vs. Pipe Dope
Frequently Asked Questions
What does light pattern mean?
A lighter, thinner-walled nut body with a lower pressure rating than the standard pattern, used on lower-pressure lines.
Does it need thread sealant?
No. The SAE 45-degree flare seals metal-to-metal; no tape or dope on the flare seat.
What tube size does it fit?
A 1/4 in. tube that has been properly 45-degree flared.
Can I substitute a standard nut?
Yes, a standard 1/4 in. SAE 45-degree flare nut fits the same flare and offers a higher pressure rating.
WARNING: This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.