1/2 in. x 1/2 in. Composite Male Swivel Run Tee
Sizes in This Series
Push-in swivel male run tees. Jump to another size or add it straight to your cart:
| Size | Part # | Price | Cart |
| 5/32 in. x 1/8 in. | 20161A | $9.99 | Add to cart |
| 5/16 in. x 1/8 in. | 20163-52 | $3.89 | Add to cart |
| 1/4 in. x 1/4 in. | 20163A | $11.99 | Add to cart |
| 1/4 in. x 1/4 in. Nickel | 20163NA | $15.99 | Add to cart |
| 3/8 in. x 3/8 in. Nickel | 20165NA | $24.99 | Add to cart |
| 1/2 in. x 1/2 in. (this page) | 20167A | $20.99 | — |
Overview
The Midland 20167A is a brass swivel male run tee with 1/2 in. push-in run ports and a 1/2 in. male NPT swivel branch, the largest in this run-tee series. It taps a 1/2 in. threaded port off a straight 1/2 in. tubing run for higher-flow air and fluid lines. The swivel NPT leg rotates into alignment after seating; brass handles -10°F to 200°F.
Technical Specifications
| MPN | 20167A |
| Fitting Type | Swivel Male Run Tee |
| Run Tube Size (x2) | 1/2 in. Push-to-Connect |
| Thread Size | 1/2 in. Male NPT Swivel (1/2-14) |
| Hex Size | 0.87 in. |
| Length | 2-3/4 in. |
| Temperature Rating | -10°F to 200°F |
Materials of Construction
| Body | Brass |
| Connection | Push-to-Connect collet and o-ring seal |
Typical Applications
Used on higher-flow 1/2 in. pneumatic and fluid runs that need a threaded branch, such as main air headers, machine supply lines, and fluid distribution. The large push-in ports support greater volume while the swivel NPT branch threads into a port and orients without stressing the tubing.
Cross-Reference and Interchange
This brass swivel run tee cross-references to these competitor and industry part numbers: 271PPS-8D-Y. Replacing one of these? Match nominal size, connections, and rating, or send us your part number and we will confirm the interchange.
Sizing and Installation Resources
- Push-to-Connect Fittings Selection Guide
- NPT Thread Tightening: Turns Past Hand-Tight
- Pipe Size Reference Chart
- Teflon Tape vs. Pipe Dope
Frequently Asked Questions
What tube size does the 20167A accept?
The run ports accept 1/2 in. OD tubing; the branch is 1/2 in. male NPT.
Is this the largest in the series?
Yes, 1/2 in. is the top of this push-in swivel run-tee series.
Is the thread repositionable?
Yes, the swivel NPT leg rotates into alignment after seating.
Do I need sealant?
Apply PTFE tape or pipe dope to the NPT leg; the push-in ports seal on the o-ring.
WARNING: This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.