1/2 in. x 1/2 in. Male Flare x Male Run Tee
1/2 in. x 1/2 in. Male Flare x Male Run Tee
Overview
The Midland 10355 is a forged brass SAE 45-degree male flare run tee with 1/2 in. male flared ends on the run and a 1/2 in. male NPT branch. It runs on a 3/4-16 flare thread and 1/2-14 pipe thread and is rated to 750 psi, letting you add an NPT take-off to a 1/2 in. flared tube line without breaking the run.
Technical Specifications
| Manufacturer Part # | 10355 |
| Fitting Type | SAE 45° Male Flare Run Tee |
| Run Connections | 1/2 in. Male Flared (3/4-16 thread) |
| Branch Connection | 1/2 in. Male NPT (1/2-14 thread) |
| Pressure Rating | 750 psi |
| Temperature Rating | -65°F to 250°F |
Materials of Construction
| Body | Brass |
| For Use With | Copper, brass, aluminum, and steel hydraulic tubing |
Typical Applications
This run tee adds a 1/2 in. male NPT branch to a continuous 1/2 in. flared tube line in fuel, gas, refrigeration, and hydraulic systems, ideal for gauge, sensor, or accessory take-offs without interrupting flow through the run.
Cross-Reference and Interchange
This brass flare run tee cross-references to these competitor and industry part numbers: 04051-0808, 151-8-8, 151F-8-8, 451-8D, 51-88, 518D, 51-8D, 51F-88, F51-8-8, FF151-8-8, S151-8-8, T3-8D. Replacing one of these? Match nominal size, connections, and rating, or send us your part number and we will confirm the interchange.
Sizing and Installation Resources
- SAE 45-Degree vs. Inverted Flare Fittings
- NPT, BSPP, and JIC Thread Identification Guide
- Teflon Tape vs. Pipe Dope
- Compression Fitting Sizing Chart
Frequently Asked Questions
What is a run tee?
The two in-line flared ends form the run; the third NPT port is the branch take-off.
Does the flare need sealant?
No. The SAE 45-degree flare seals metal-to-metal. Apply PTFE tape or pipe dope only to the 1/2 in. male NPT branch.
Is the flare SAE 45-degree?
Yes. The 1/2 in. flared ends use the SAE 45-degree seat for hydraulic and refrigeration tubing.
What is the pressure rating?
750 psi at ambient temperature with properly flared 1/2 in. tubes.
WARNING: This product can expose you to chemicals including lead, known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.