1/2 in. Male Flare Tee
1/2 in. Male Flare Tee
Overview
The Midland 10162 is a 1/2 in. forged brass SAE 45-degree male flare union tee with three 1/2 in. flared connections on a 3/4-16 thread. It joins three flared 1/2 in. tube runs into one branch point with metal-to-metal flare seals. Rated for 750 psi and -65°F to 250°F, it handles copper, brass, aluminum, or steel tubing in fluid, air, and gas service.
Technical Specifications
| Manufacturer Part # | 10162 |
| Fitting Type | Union Tee |
| Connection Size | 1/2 in. x 1/2 in. x 1/2 in. |
| Connection Type | SAE 45° Male Flared (x3) |
| Thread Size | 3/4-16 |
| Pressure Rating | 750 psi |
| Temperature Rating | -65°F to 250°F |
Materials of Construction
| Body | Forged Brass |
| For Use With | Copper, Brass, Aluminum, Steel Hydraulic Tubing |
Typical Applications
This 1/2 in. brass flare tee branches a flared tube line in HVAC and refrigeration, LP and natural gas, compressed air, and general plumbing and equipment plumbing. The SAE 45-degree seat seals without thread dope on the flared legs, making it quick to assemble and reusable during service.
Cross-Reference and Interchange
This 1/2 in. brass flare tee cross-references to these competitor and industry part numbers: 144-8, 144F-8, 244-8, 444-8, 44-8, 04044-08, F44-8, T2-8, S144-8, P-44-8. Replacing one of these? Match nominal size, connections, and rating, or send us your part number and we will confirm the interchange.
Sizing and Installation Resources
- SAE 45 vs. Inverted Flare Fittings
- NPT, BSPP & JIC Thread Identification Guide
- Compression Fitting Sizing Chart
- Teflon Tape vs. Pipe Dope
Frequently Asked Questions
What does the 1/2 in. size refer to?
It is the flare tube size—all three legs accept 1/2 in. OD flared tubing on a 3/4-16 thread.
Do the flared legs need pipe dope?
No. The 45-degree flare makes a metal-to-metal seal. Sealant is only for threaded NPT connections.
Can I reuse this tee after taking a line apart?
Yes, as long as the flare seats remain clean and undamaged.
What is the pressure limit?
750 psi at ambient temperature with properly flared tubing.
⚠ WARNING: This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.