3/8 in. x 1/4 in. Push-In x Male NPT Elbow
3/8 in. x 1/4 in. Push-In x Male NPT Elbow
Sizes in This Series
Forged brass 90-degree push-in x Male NPT elbows. Jump to another size or add it straight to your cart:
| Size | Part # | Price | Cart |
| 1/4 in. x 1/4 in. | 20069 | $4.84 | Add to cart |
| 3/8 in. x 1/4 in. (this page) | 20072 | $6.99 | — |
| 1/2 in. x 1/4 in. | 20074 | $10.99 | Add to cart |
Overview
The Midland 20072 is a forged brass 90-degree elbow connecting 3/8 in. push-in tubing to a 1/4 in. Male NPT port. The push-to-connect collet seals the tube on insertion, and the right-angle body turns the line cleanly at the port without kinking the tubing.
Technical Specifications
| MPN | 20072 |
| Tube Size (Push-In) | 3/8 in. |
| Thread Size | 1/4 in. - 18 Male NPT |
| Connection Type | Push-to-Connect x Male NPT, 90° |
| Temperature Rating | -10°F to 200°F |
Materials of Construction
| Body | Forged Brass |
| Collet / Grip Ring | Acetal with stainless gripping teeth |
| O-Ring Seal | Nitrile (NBR) |
Typical Applications
Used where a 3/8 in. tube must turn 90 degrees into a 1/4 in. NPT port on cylinders, valves, and manifolds in pneumatic machinery and air-logic panels. The forged brass body tolerates vibration and repeated reconnection.
Cross-Reference and Interchange
This push-in elbow cross-references to these competitor and industry part numbers: 02069-0604, 169PLNS-64, 269-OF-06x04, 269PP-6-4, 269PP-6B, 69PC-6-4, 769-64, PC69-6B, PTC69-6B, QPL69-6-4. Replacing one of these? Match nominal size, connections, and rating, or send us your part number and we will confirm the interchange.
Sizing and Installation Resources
- Push-to-Connect Fittings Selection Guide
- NPT Thread Tightening: Turns Past Hand-Tight
- Pipe Size Reference Chart
- Teflon Tape vs. Pipe Dope
Frequently Asked Questions
What tubing fits the push-in end?
3/8 in. (10 mm nominal) OD tubing inserts directly into the collet.
Does the elbow swivel?
No. This is a fixed 90-degree elbow. For a rotating leg, choose a swivel elbow.
How do I seal the NPT thread?
Apply PTFE tape or pipe dope and tighten one to two turns past hand-tight.
What is the temperature range?
Rated for -10°F to 200°F service.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.