3/4 in. Male NPT x Slip Schedule 80 PVC Adapter
3/4 in. Male NPT x Slip Schedule 80 PVC Adapter
Sizes in This Series
Schedule 80 PVC male NPT x slip socket adapters. Jump to another size or add it straight to your cart:
| Size | Part # | Price | Cart |
| 3/4 in. (this page) | 836007 | $11.99 | — |
| 1-1/2 in. | 836015 | $24.99 | Add to cart |
| 2-1/2 in. | 836025 | $34.99 | Add to cart |
Overview
The MPN 836007 is a 3/4 in. Schedule 80 PVC adapter with a male NPT (3/4-14) thread on one end and a female slip socket on the other, transitioning a threaded pipe run to a solvent-welded socket connection. Molded in gray Schedule 80 PVC, it brings the chemical resistance and pressure headroom needed where threaded and cemented PVC systems meet.
Technical Specifications
| Part Number (MPN) | 836007 |
| Fitting Type | Adapter |
| Size | 3/4 in. x 3/4 in. |
| Connection Type | Male NPT x Female Socket (Slip) |
| Thread Size | 3/4 - 14 NPT |
| Material | Schedule 80 PVC |
| Color | Gray |
| Max Temperature | 140°F |
| Sold Per | Each |
Materials of Construction
| Body | Schedule 80 polyvinyl chloride (PVC) |
| Threaded End | Male NPT (MPT), 3/4 - 14 |
| Socket End | Female slip socket, solvent-weld |
| Color | Gray |
Typical Applications
This male-adapter connects 3/4 in. NPT threaded equipment, valves, or pipe to 3/4 in. Schedule 80 slip-socket piping in chemical feed systems, water and wastewater treatment, irrigation, and industrial process lines. The male thread mates with a female threaded port while the slip end solvent-welds to pipe.
Cross-Reference and Interchange
This adapter cross-references to these competitor and industry part numbers: 4596K855. Replacing one of these? Match nominal size, connections, and rating, or send us your part number and we will confirm the interchange.
Sizing and Installation Resources
- PVC Schedule 40 vs. 80 Fittings
- PVC Chemical Compatibility Chart
- NPT Thread Tightening: Turns Past Hand-Tight
- Teflon Tape vs. Pipe Dope
- Pipe Size Reference Chart
Frequently Asked Questions
Which end threads and which end cements?
The male NPT end (3/4-14) threads into a female threaded port. The slip socket end is solvent-welded onto 3/4 in. Schedule 80 PVC pipe.
Do I use sealant on the threaded end?
Yes. Apply PTFE tape or PVC-compatible pipe dope to the male NPT thread, then hand-tighten plus one to two turns. Avoid overtightening.
Will it accept Schedule 40 pipe in the socket?
Yes. The 3/4 in. socket fits 3/4 in. Schedule 40 or 80 pipe, since both share the same outside diameter.
What is the temperature limit?
About 140°F maximum; de-rate working pressure as temperature climbs above 73°F.
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.