129Sbm 1/8 in. Mini Splicer
Overview
The 129SBM (MPN 07062-02) is a brass single mini barb splicer that joins two runs of 1/8 in. polyethylene or plastic tubing in a straight inline union. Both ends carry a 1/8 in. mini barb, and the machined brass body resists corrosion in low-pressure fluid, air, and instrument lines.
Technical Specifications
| Manufacturer Part # | 07062-02 |
| Fitting Type | Single Mini Barb Splicer (Union) |
| Connection 1 | 1/8 in. Mini Barb |
| Connection 2 | 1/8 in. Mini Barb |
| Max Operating Pressure | 150 psi |
| Operating Temperature | -40 to 160 °F |
| For Use With | Polyethylene and plastic tubing |
Materials of Construction
| Body | Brass |
| Fabrication | Machined |
Typical Applications
Used to splice 1/8 in. poly or plastic tubing in laboratory, instrumentation, pneumatic, and light fluid-transfer systems. The barbed ends grip soft tubing and are typically secured with a small clamp or tie for vibration resistance on low-pressure runs.
Cross-Reference and Interchange
This mini barb splicer is a standard Anderson Metals / Midland item. If you are replacing a competitor fitting, send us your part number and we will confirm the interchange by matching barb size, configuration, and pressure rating.
Sizing and Installation Resources
Frequently Asked Questions
What tubing does this splicer fit?
It is sized for 1/8 in. ID polyethylene and plastic tubing on both ends.
Do I need a clamp?
For low-pressure work the barb often holds on its own, but a small clamp or zip tie is recommended for vibration or warm conditions.
Is the body brass?
Yes, the fitting is machined from brass for corrosion resistance.
⚠ WARNING: This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.